Description
[Size]
Width: Approx. 54mm
Height: Approx. 36mm
Depth: Approx. 26mm (not including bolts)
Bolt: M6-20mm
[Material]
Body: resin
Bolt: Steel
[Components] Main body x 1
**All M&Ms sculptures are handmade, so please be aware of the following before purchasing.
[Aging and Deterioration]
M&Ms license plate bolts and valve caps are finished with paint.
Please understand that discoloration, fading, gloss loss, and deterioration of the coating may occur over time when the product is installed on the bike body.
*Gravel, sand, and rain may accelerate the aging process.
[Early Deterioration]
M&Ms license plate bolts and valve caps are subjected to durability testing and aging/degradation checks for “installation on motorcycles” and “indoor parking lot storage”.
The following will accelerate the deterioration of the paint and coatings.
Please refrain from using the product in such environments, or use it with the expectation that it will deteriorate over time.
Outdoor storage (storage in the rain or sunlight will lead to premature deterioration.)
Installation and use on bikes susceptible to rain, sand, and gravel, or installation on the front license plate
Prolonged riding under intense sunlight.
[Durability of paint and body]
Due to the nature of the resin, the surface coating may have a slight tendency to lift slightly.
The color of the product may slightly differ from the color of the image shown on the website due to the preparation of the paint each time.
[Neon colors]
M&Ms neon colors are made from special American paints for their high color quality.
They can express pop colors that cannot be achieved with Japanese paints, but their durability and weather resistance are inferior to that of Japanese paints.
Please understand this before purchase.
[Installation notes]
This product has bolts embedded in the resin body.Excessive tightening may damage the bolt joints and the main unit.
In the case of a thin part of the molding or a multi-piece structure, holding the connecting parts when tightening may damage the resin.Be sure to hold the thick resin “body” and tighten the nut.
Some models may not be able to be installed due to the long bolts.(For Vespa) It will take a little time, but we can make it in the size of the desired bolt size, so please let us know.
May not be used in combination with a license plate cover.
Installation on cars requires tightening with nuts.
*Please note that this is not a left / right pair.
*The image may contain other colors and products.
*There may be changes in product specifications due to the manufacturer’s reasons.
.
WWI NumberBolt
Representation of a Soldier in the Disasters of World War I
It was sculpted based on the image of the gas masks that became essential equipment for soldiers during World War I, when chemical weapons were first used in earnest around the world.
M&Ms Sculpture.
A finely crafted production
The well-sealed mask is equipped with a heavy, high-visibility lens and a filter for the air intake.
The duct hoses for the exhaust, which have been made realistic for each mountain, are located where they would be connected to the cylinders on the back.
The “belt fastener” that gives a cheap feeling like a thing of the time further produces the overall atmosphere.
Real painting.
Clear shading for a full antique look
Each piece is carefully PAINTED to give it a real texture that mass production can never produce.
The clear shade pushes out the antique feeling to the full, and it is a point with outstanding impact even casually.
Gimmick.
The bolts are embedded in the license plate bolts
Making&Monsters M6 bolts are embedded in the original sculptures to create license plate bolts.
A larger washer is included to reduce cracking of the license plate.
Chemical Weapon after WWI.
International Convention on the Control of Chemical Weapons
In World War I, chemical weapons were used in earnest for the first time, resulting in more than 1.3 million casualties, including 100, 000 deaths.
At the same time, the misery of biological and chemical weapons was strongly recognized by the international community, and in 1925, the first international treaty to control biological and chemical weapons was enacted.
About
M&Ms(Making&Monsters)
M&Ms (Making&Monsters)
Art works by artist Mai.
You can enjoy the line-up which is not confined to any genre, based on the hand painting which attracts attention with its realism.
Reviews
There are no reviews yet.