HEX’HEAD NumberBolt – U4944610334

Description

[Size]
Width:Approximately 24mm
Outer Diameter:Approximately 2mm
Depth:Approx. 15mm(Bolt not included)
Bolt:M6-20mm

[Material]
Body:Resin
Bolt:Steel

Capacity
BodyX1

**Please note that this is not a pair.
*Please note that the product specification may change due to manufacturer reasons.
*Other colors and products may be included in the image.

[Aging and Deterioration]
*M&Ms number bolts and valve caps are finished with paint.
*Please understand that discoloration, fading, gloss loss, and deterioration of the coating may occur over time when the product is installed on the car body.
*Please be aware that the progression of deterioration over time may be accelerated by skipping stones, sand, rain, and other factors.

[Early Deterioration]
*M&Ms number bolts and valve caps are subjected to durability testing and aging/degradation checks for “installation on motorcycles” and “indoor parking lot storage”.
*The following conditions will accelerate the deterioration of the paint and coating. Please refrain from using the product under the following conditions, or use it with the expectation that it will change and deteriorate over time.
*We do not guarantee the early deterioration of the product under the relevant environment.
Outdoor storage (storage in the rain or sunlight will lead to premature deterioration.)
Installation and use on vehicles and front license plates susceptible to rain, sand, and flying rocks.
Long hours of driving in summer when the sun is strong and the car is exposed to the west sun

[Durability of paint and body]
*Due to the nature of the resin, the surface coating may show some floating.
*Due to the mixing process of the paint, there may be slight differences between the color of the product and the color shown in the picture.

[Various neon colors]
*M&Ms Neon Colors are made from special American paints because of their excellent colors. Although these paints can express pop colors that Japanese paints cannot, their durability and weather resistance are inferior to those of Japanese paints. Please understand this before purchase.

[Installation notes]
*This product has bolts embedded in the resin body. Please note that “excessive” tightening may damage the bolt joints and the body.
*If you tighten the nut by holding a thin part of the molding or a connecting part of a several-piece structure, the resin may be damaged. Be sure to tighten the nut by holding the thick resin body.
*Some car models may not be able to be fitted with long bolts (e.g. Vespa). (Vespa, etc.) It may take some time, but we can manufacture the bolts with the desired bolt size, so please let us know.
*Please note that license plate covers, etc. may not be used in combination.
*Installation on the car requires tightening with nuts.
.

HEX’HEAD*NUMBER BOLT Shoulder Bag
Cool HEXHEADSeries of Iron/Steel type

M&Ms Sculpture. Faithfully reproduced HEX (hexagonal) Top
License Plate Bolt that faithfully reproduces the head of the HEX (hexagonal) Bolt.
Cool HEXHEADSeries of Iron/Steel type

Real painting. Delicate paint separation, which is difficult to achieve in mass production
PAINT carefully one by one.
A one-of-a-kind product with delicate painted letters that are difficult to produce in mass production..

Gimmick. Embed the Bolt into the License Plate Bolt
We have an M6 Bolt embedded in the molding..
In order to reduce the crack of License Plate, Washer of large size is attached..

About M&Ms(Making&Monsters)
M&Ms (May KingAndMONSTER S2s)
Artisto Mai’s Arts works with a focus on modeling.
You can enjoy the lineup that is not confined to genre on the axis of Hand painting where realism attracts the eye..