FXXK THE ROADRAGE NumberBolt – U4944611113

Description

[Size]
Width: 40mm
Height: 49mm
Depth: 19mm (excluding bolt)
Bolt: M6-20mm
[Material]
Body: resin
Bolt: Steel
[Components] Main body x 1

**All M&Ms sculptures are handmade, so please be aware of the following before purchasing.

[Aging and Deterioration]
M&Ms license plate bolts and valve caps are finished with paint.
Please understand that discoloration, fading, gloss loss, and deterioration of the coating may occur over time when the product is installed on the bike body.
*Gravel, sand, and rain may accelerate the aging process.

[Early Deterioration]
M&Ms license plate bolts and valve caps are subjected to durability testing and aging/degradation checks for “installation on motorcycles” and “indoor parking lot storage”.
The following will accelerate the deterioration of the paint and coatings.
Please refrain from using the product in such environments, or use it with the expectation that it will deteriorate over time.

Outdoor storage (storage in the rain or sunlight will lead to premature deterioration.)
Installation and use on bikes susceptible to rain, sand, and gravel, or installation on the front license plate
Prolonged riding under intense sunlight.

[Durability of paint and body]
Due to the nature of the resin, the surface coating may have a slight tendency to lift slightly.
The color of the product may slightly differ from the color of the image shown on the website due to the preparation of the paint each time.

[Neon colors]
M&Ms neon colors are made from special American paints for their high color quality.
They can express pop colors that cannot be achieved with Japanese paints, but their durability and weather resistance are inferior to that of Japanese paints.
Please understand this before purchase.

[Installation notes]
This product has bolts embedded in the resin body.Excessive tightening may damage the bolt joints and the main unit.
In the case of a thin part of the molding or a multi-piece structure, holding the connecting parts when tightening may damage the resin.Be sure to hold the thick resin “body” and tighten the nut.
Some models may not be able to be installed due to the long bolts.(For Vespa) It will take a little time, but we can make it in the size of the desired bolt size, so please let us know.
May not be used in combination with a license plate cover.
Installation on cars requires tightening with nuts.

*Please note that this is not a left / right pair.
*Paints and coatings will deteriorate over time.
*When installing, it is necessary to tighten the nuts.
*The images include other colors and products.
*There may be changes in product specifications due to the manufacturer’s reasons.
.

FXXK THEROAD RAGE”
FXXK THE ROAD RAGE license plate bolt with a strong message in the powerful middle finger

M&Ms Sculpture./A gem that shows attention to detail in modeling
The details such as fine wrinkles, scratches, and peeled bones are of course fine details.
The back side of the case has been carefully crafted so that the “hand” can be recognized from the side when the case is worn.

Real painting. /Inking that emphasizes wrinkles and contours to enhance the beauty of the modeling
Each piece is carefully PAINTED to give it a real texture that mass production can never produce.
Black, brown: Simple inked color to maximize the fineness of modeling.
Dark Pop Color Series:The dark pop colors are filled with monster-like pop colors, dull shiny nails, wounds, and blotches of blood.

Gimmick./Bolt to embedded number bolt
Making&Monsters M6 bolts are embedded in the original sculptures to create license plate bolts.
A larger washer is included to reduce cracking of the license plate.

[Mounting on CAR]
These number bolts are M6 pitch 1.0, which is the same as the bolts for ordinary bikes, so they can be installed.
*Tightening with a nut is required.

About
M&Ms (Making & Monsters)
Art works by artist Mai.
You can enjoy the line-up which is not confined to any genre, based on the hand painting which attracts attention with its realism.