CRAZY CUB DUCK Number Bolt – U4944610187

Description

[Size]
Width: Approx. 27mm
Height: Approx. 46mm
Depth: Approx. 34mm (excluding bolts)
Bolt: M6-20mm

[Material]
Main unit: resin
Bolt: Steel

[Components]
Main unit x 1

**All M&Ms sculptures are handmade, so please be aware of the following before purchasing.

[Aging and Deterioration]
M&Ms license plate bolts and valve caps are finished with paint.
Please understand that discoloration, fading, gloss loss, and deterioration of the coating may occur over time when the product is installed on the bike body.
*Gravel, sand, and rain may accelerate the aging process.

[Early Deterioration]
M&Ms license plate bolts and valve caps are subjected to durability testing and aging/degradation checks for “installation on motorcycles” and “indoor parking lot storage”.
The following will accelerate the deterioration of the paint and coatings.
Please refrain from using the product in such environments, or use it with the expectation that it will deteriorate over time.

Outdoor storage (storage in the rain or sunlight will lead to premature deterioration.)
Installation and use on bikes susceptible to rain, sand, and gravel, or installation on the front license plate
Prolonged riding under intense sunlight.

[Durability of paint and body]
Due to the nature of the resin, the surface coating may have a slight tendency to lift slightly.
The color of the product may slightly differ from the color of the image shown on the website due to the preparation of the paint each time.

[Neon colors]
M&Ms neon colors are made from special American paints for their high color quality.
They can express pop colors that cannot be achieved with Japanese paints, but their durability and weather resistance are inferior to that of Japanese paints.
Please understand this before purchase.

[Installation notes]
This product has bolts embedded in the resin body.Excessive tightening may damage the bolt joints and the main unit.
In the case of a thin part of the molding or a multi-piece structure, holding the connecting parts when tightening may damage the resin.Be sure to hold the thick resin “body” and tighten the nut.
Some models may not be able to be installed due to the long bolts.(For Vespa) It will take a little time, but we can make it in the size of the desired bolt size, so please let us know.
May not be used in combination with a license plate cover.
Installation on cars requires tightening with nuts.

*Please note that this is not a left / right pair.
*Excessive tightening may damage the bolt joints and the main unit.
*The image may contain other colors and products.
*There may be changes in product specifications due to the manufacturer’s reasons.
.

Pop and crazy number bolt expressed on the theme of turnips
A pop and crazy number bolt with a Cub rear fender on the beak by a duck who loves HONDA’s Cub.

M & Ms Sculpture.
The distinctive beak represents the rear fender of a Cub.
The bolted tip attached to the tip gives it a Cub-like appearance.
We focused on the lovability of the sloppily drooping tongue and unmotivated expression.

Real painting
The beak and helmet are made of glossy clear material, and the eyes are inked to emphasize the wrinkles on the face and bloodshot eyes.

Gimmick.com/ Bolt to embedded number bolt
Making&Monsters M6 bolts are embedded in the original sculptures to create license plate bolts.
A larger washer is included to reduce cracking of the license plate.

M & Ms (Making and Monsters)
Art works by artist Mai.
You can enjoy the line-up which is not confined to any genre, based on the hand painting which attracts attention with its realism.