Blast Barrier X – U4944611390

Description

smoke
Material: Polycarbonate (Thickness 3mm)
Size: Length 380mm x width 340mm
[Set components]
Windshield x 1
Sponge x 1
Double-sided tape x 1pc
Flat Cap Screw (M6 x 25mm) x 2pcs.
Flat Cap Screw (M6 x 20mm) x 2pcs.
U Nut x 4pcs.
Flat Washer x 4pcs.
Rosette Washer x 4pcs.
Cushion rubber (2mm thickness) x 2pcs.
Rubber spacer (three-dimensional rubber) x 2pcs.

**Approx. fitment for CB650R 2021 model (CB650RAM J 2BL-RH03).Must be installed with the model specific installation bracket (99238).
*Installation image is for reference only.
*Mounting brackets are sold separately.
*CB1100 RS (SC65) 17:Part numbers 61380 and 92322 are required.
*The bracket for installation is the same specification as the conventional Blast Barrier & Aero Visor for the models listed in the compatibility chart on the right.(It will not interfere with Blast Barrier or Aero Visor and no need to change the bracket.)
*When installing, temporarily assemble the bracket and windshield so that no stress is applied to any part of the windshield when it is mounted on the bike.(Also, be careful not to over-torque the windshield and bracket when tightening them to avoid damage.A lock nut is used to prevent the nut from loosening.
*Do not use cleaners or water repellents containing solvents, as they may damage the surface of the windshield or cause it to crack.
*Blast barrier and garnish face (71540-71545) cannot be installed.
*This product comes with a set of child parts necessary for attaching the optional vehicle specific bracket to the vehicle body.
*There may be changes in product specifications due to the manufacturer’s reasons..

Here is the instruction manual.
.

The “Blast Barrier X” is an upgraded version of the popular Blast Barrier with a sportier and more fearless image.The spoiler-shaped wings on both sides of the upper part of the windshield are designed to give a strong impression to the viewers.Made in Japan of polycarbonate (3mm thick).It is about 30 times stronger than the same thickness acrylic, and has both high transparency and durability!Streamlined, yet highly transparent, with minimal distortion and a safety-conscious finish!(Excluding the spoiler part) 380mm (H) x 340mm (W) (The dimension from the upper edge of the headlight cutout to the upper edge of the visor is approx. 275mm, which is slightly larger than the conventional product).It is the best choice for comfortable and stylish riding.Compatible with a wide range of vehicles by combining with the optional bike-specific brackets!

[Example of fit]
HONDA:CB1100 RS (SC65) 17