Description
[Size]
Width: Approx. 29mm
Height: Approx. 40mm
Depth: Approx. 35mm (excluding bolts)
Bolt: M6-20mm
[Material]
Body: resin
Bolt: Steel
[Components] Main body x 1
**All M&Ms sculptures are handmade, so please be aware of the following before purchasing.
[Aging and Deterioration]
M&Ms license plate bolts and valve caps are finished with paint.
Please understand that discoloration, fading, gloss loss, and deterioration of the coating may occur over time when the product is installed on the bike body.
*Gravel, sand, and rain may accelerate the aging process.
[Early Deterioration]
M&Ms license plate bolts and valve caps are subjected to durability testing and aging/degradation checks for “installation on motorcycles” and “indoor parking lot storage”.
The following will accelerate the deterioration of the paint and coatings.
Please refrain from using the product in such environments, or use it with the expectation that it will deteriorate over time.
Outdoor storage (storage in the rain or sunlight will lead to premature deterioration.)
Installation and use on bikes susceptible to rain, sand, and gravel, or installation on the front license plate
Prolonged riding under intense sunlight.
[Durability of paint and body]
Due to the nature of the resin, the surface coating may have a slight tendency to lift slightly.
The color of the product may slightly differ from the color of the image shown on the website due to the preparation of the paint each time.
[Neon colors]
M&Ms neon colors are made from special American paints for their high color quality.
They can express pop colors that cannot be achieved with Japanese paints, but their durability and weather resistance are inferior to that of Japanese paints.
Please understand this before purchase.
[Installation notes]
This product has bolts embedded in the resin body.Excessive tightening may damage the bolt joints and the main unit.
In the case of a thin part of the molding or a multi-piece structure, holding the connecting parts when tightening may damage the resin.Be sure to hold the thick resin “body” and tighten the nut.
Some models may not be able to be installed due to the long bolts.(For Vespa) It will take a little time, but we can make it in the size of the desired bolt size, so please let us know.
May not be used in combination with a license plate cover.
Installation on cars requires tightening with nuts.
*Please note that this is not a left / right pair.
*The images include other colors and products.
*There may be changes in product specifications due to the manufacturer’s reasons.
.
Kurama Tengu, the forger of Yoshitsune
Mt. Kurama Monjogadani
The Great Tengu is said to have taught swordsmanship to Ushiwaka, who aspires to defeat the Heike clan.
According to one theory, the Great Tengu, who hated the haughty Taira clan, confronted Benkei in order to force him to take the post of Ushiwaka.
Because of its strength, the figure of the Tengu has been changed and transformed through the stories passed down from generation to generation, and this sculpture represents the Tengu.
M&Ms Sculpture.
A gem that shows attention to detail in modeling
The wrinkles and facial muscles that form from strong emotions are carefully crafted with attention to detail.
In addition, the left and right sides have slightly different expressions to express a more realistic “human touch”.
Real painting.
More realism is expressed through the use of different textures
The monochromatic areas are also highlighted with different shadows and highlights to give a strong three-dimensional effect.
The red tengu and black tengu are glossy/semiglossy, and the texture of the masks are reproduced.
Travel charms.
As a travel charm
Tengu are commonly regarded as demons that lead people to evil ways, and while they were created based on people’s awe, they have been worshipped as symbols of gods that watch over travelers since ancient times.
M & Ms has chosen to focus on the latter, and has released the number bolt as a prayer for the safety of all those traveling by iron horse
Gimmick.
The bolts are embedded in the license plate bolts
Making&Monsters M6 bolts are embedded in the original sculptures to create license plate bolts.
A larger washer is included to reduce cracking of the license plate.
About
M&Ms(Making&Monsters)
M&Ms (Making&Monsters)
Art works by artist Mai.
You can enjoy the line-up which is not confined to any genre, based on the hand painting which attracts attention with its realism.
Reviews
There are no reviews yet.