Aero Windshield – U4944612768

Description

[Size] Compared to stock height (length): Approx. +30mm
[Specification] Dry carbon, open fiber dry carbon only: Pre-clear painted

**There may be a slight difference in the appearance of the actual product depending on the type of display.Please see as a sample image.
*Some of the images are before modification to the shape of installation.The shape varies depending on the model.

*As to FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.

*The above information does not apply to painted (PT), wet, and dry carbon FRP products.

*No cancellations, returns, or exchanges after an order has been placed.
*The image may include other types and products.
*There may be changes in product specifications due to the manufacturer’s reasons.
.

* This product will be made after an order, We will notice currect shipping time after we recieve an order.

* The image is only for reference. The image shown may differ from the actual product.

The height (length) is set to about 30mm compared with the stock windshield shape to improve the aerodynamic characteristics and windproof performance.
The base cowl is also sold separately as a repair item.

[Wet Carbon]
Wet carbon is generally manufactured by manually impregnating carbon cloth or glass mats that have not been impregnated with resin, with polyester resin and then curing them by natural drying, so there is no need for special equipment.
However, since the entire process is done by hand, it is very difficult to stabilize production because of slight variations in the amount of resin, etc., even for skilled workers, and because of the natural drying process it is also affected by the temperature and humidity at the time of molding.
The more complex the shape, the more likely it is for carbon fiber distortions to occur on the product’s surface, and some variation in the product’s weight is also inevitable.
As for the strength, it is almost the same as that of FRP products.
No clear coating is required for the final finish.

[Dry Carbon]
Dry carbon is a product made of a special material called carbon prepreg, in which carbon cloth is impregnated with epoxy resin and baked for a long period of time in an autoclave, a pressure oven that maintains high temperature, high pressure, and vacuum conditions.
As with wet carbon, the entire process is done by hand, but it requires special materials and space, such as molds that can withstand high temperatures and high pressure, various films needed to wrap the molds and create a vacuum, and a large freezer to store the prepreg. This makes it an expensive product.
The process is also complicated, so it will take longer to deliver the product.
As for molding, since the carbon prepreg itself must be used within a certain amount of time and deteriorates especially due to changes in temperature, we conduct a series of molding operations in a work space that is not affected by air temperature, room temperature, humidity, and so on.
It is baked in the autoclave with heat and pressure while maintaining a vacuum state, resulting in a high-density material that has high strength and light weight.
The carbon prepregs are pattern-cut so that all the materials are the same, and if they are stacked in the same order, they can be easily formed the same way each time. Although it is a manual process, variations in weight can be minimized, and there are almost no gaps in the carbon fibers.
As for the final finish, all the products are clear coated (except for the racing models).

Frequently Asked Questions
Q:Can wet carbon products be installed without clear coating?
A:As is the case with all FRP/wet carbon products, it is possible to install without coating.
However, depending on the conditions of use and storage, without coating there may be discoloration, premature deterioration, or unexpected damage, so clear coating is recommended.

Q:
A:

Dry carbon is a general term for all products made of a special material called carbon prepreg.
A-TECH usually uses twill weave carbon cloth prepreg for production.