Carrier Box Bracket Set – U4944618608

Description

[Bracket body] Steel, black painted finish
[Included] rubber plate, rubber strap

[Bikes confirmed for installation]
Super Cub 50 (AA09) stock rack (Pattern for drilling position included)
Super Cub 110 (JA44/JA59) stock rack (Pattern for drilling position included)
Cross Cub 50 (AA06) stock rack (Pattern for drilling position included)
Cross Cub 110 (JA45/JA60) stock rack (Pattern for drilling position included)
Super Cub C125 (JA48/JA58) stock rack
GROM (JC92) with SP Takegawa rear rack
Monkey 125 (JB02/JB03) with SP Takegawa large rear rack
DAX125 (JB04) with SP Takegawa rear rack
Rebel 250 (MC49) with SP Takegawa rear rack

[Bikes confirmed to be unable to install (due to narrow space between rack and body, installation is not possible)]
Super Cub 50 (AA04)
Super Cub 110 (JA10)
Cross Cub (JA10)

**When installing this product, drilling of holes in the folded container is required.
*Includes pattern for SP Takegawa’s recommended position (The pattern is for Super Cub 50 / 110 and Cross Cub 50 / 110, which are SP Takegawa’s confirmed models.) Please check this as a reference for the hole drilling position.
*Even if the bike is equipped with a rack, if the space between the rack and the body is too narrow, the bracket cannot be installed.For CT125 (JA55 / JA65), we recommend the 50L dedicated set.
*If you use this product on a bike other than the one confirmed by SP Takegawa, please check the dimensions of the bracket and the space under the carrier of the bike to which it will be installed before purchasing.
*The allowable load of the container must be within the allowable load of the rack attached to the bike.
*This product is a bracket set only.Carrier box is not included.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
*There may be changes in product specifications due to the manufacturer’s reasons.
.

Carrier Box Bracket Set that can be attached to the stock carrier or SP Takegawa’s rear rack with convenient loading function

This product is a universal bracket set that can be used to attach containers or boxes to the carrier.
Long holes are provided at the screw fixation points to increase the degree of freedom of the fixation position.
The bracket is folded to increase strength and reduce deformation due to tightening.
The main body of the bracket is made of steel with black paint finish.
The kit includes a large-diameter washer to increase the contact between the container and carrier when tightened, and a rubber plate and rubber strap to prevent the box and other parts from shaking and shifting due to vibration.